| Features & Functions: |
This Dual Universal Voltage-Input Monitor is an amazing little gauge. For each of two independent channels, you
can use it with any sensor, controller or
device that puts out a signal of 0 Volts to 5 Volts or within that range. You can set up almost any positive-slope
or negative-slope linear equation by programming the display value represented by each of these endpoints. For
example, you can also use it with active/powered transducers. The function symbol (lower right on gauge-face) is
a generic "asterisk". You can use this with most any wideband controller/sensor that has a linear analog output,
but we also provide this with specific "AFR" or Lambda symbols for that purpose. See product D1-WBAWBA-Mx.
- Range, channel 1: 0.00 to 9.99, 0.0 to 99.9 or 0 to 999 (user configurable)
- Range, channel 2: 0.00 to 9.99, 0.0 to 99.9 or 0 to 999 (user configurable)
- Channel-swap feature swaps display position
- User-settable active IIR filter level (independent for each display channel)
- Dual 3-digit numeric displays
- Park-light dimmer
- User-settings button directly on gauge face
- User-settable day and night intensities (9 levels each)
|
|
|
 |
| Colors: |
- Bezel: natural machined aluminum
- Display: Bright Red or Ice Blue
|
|
|
|
| Gauge size: |
- 2-1/16"(52mm) mounting diameter
|
|
|
|
| Senders required: |
- This gauge will work with almost any sensor that
puts out a linear signal of 0V to 5V or within that range.
You can also use resistive-sensors configured as
part of a voltage divider with another fixed resistor. Two such channels are required.
|
|
|
|
| Related docs: |
|
|
|
|
| Ordering info: |
- D1-UVMUVM-MR (Red display): $99
- D1-UVMUVM-MB (Blue display): $119
|
|
|
Mechanical specs